020 3951 5133

MVHR Service London — Mechanical Ventilation Heat Recovery Servicing

Need an MVHR service in London? Collide Group services Mechanical Ventilation with Heat Recovery systems from £120 — filter replacement, heat exchanger clean, fan clean and full airflow rebalance. We cover every major brand including Vent-Axia, Nuaire, Titon, Zehnder, Vaillant, Brink and EnviroVent, with same-week appointments across all London boroughs.

Quick answer

An MVHR system should be serviced once a year, with filters replaced every 6–12 months. An MVHR service in London costs from £120. Collide Group is a WRAS-certified building services specialist based in Northolt, serving all of Greater London. Every MVHR service includes filter replacement, heat exchanger core clean, fan clean, condensate drain check, airflow measurement against design rates, a control and summer bypass test, and a full written report.

What Is an MVHR System?

MVHR stands for Mechanical Ventilation with Heat Recovery. It is the whole-home ventilation system fitted in most modern, airtight London flats and new-build developments. It continuously extracts stale, humid air from your kitchen, bathroom and utility room, and supplies filtered fresh air to your bedrooms and living room.

The clever part is the heat exchanger at its core: it recovers up to 90% of the heat from the air being thrown away and transfers it into the incoming fresh air — so you get constant fresh air without throwing your heating out of the window. If your flat has an HIU for heating and hot water, there is a very good chance it has an MVHR unit too, usually in a utility cupboard, ceiling void or loft.

Why MVHR Systems Need Annual Servicing

An MVHR unit runs 24 hours a day, 365 days a year — it is the hardest-working appliance in your home. Its filters trap London's dust, pollen and traffic pollution, and they steadily block up. Once airflow drops, the system stops removing moisture from your home, and the problems start quickly.

  • Blocked G4, F7 and ePM1 filters choking airflow
  • Condensation on windows and rising humidity
  • Black mould in bathrooms, bedrooms and on cold walls
  • Dust and debris fouling the heat exchanger core
  • Blocked condensate drains leaking water
  • Fan motors working harder and drawing more power
  • Noisy operation from dirty or unbalanced fans
  • Airflow drifting below Building Regulations Part F rates

What's Included in Our MVHR Service

Our engineers follow the manufacturer service schedule for your specific unit. We don't just swap the filters and leave — we clean the core, measure the airflow and confirm the system is still ventilating your home at the rate it was designed for.

  • Filter inspection and replacement (G4, F7 and ePM1 grades)
  • Heat exchanger core removal, clean and reseat
  • Fan and impeller clean, bearing and noise check
  • Condensate drain and trap check, clear and flush
  • Ductwork, valve and terminal inspection
  • Airflow measurement against the original design rates
  • Summer bypass, boost and humidity control testing
  • Full written service report with photos and recommendations

MVHR Brands We Service

Vent-AxiaNuaireTitonZehnderVaillant recoVAIRSystemairBrinkEnviroVentAirflowDomusBlaubergItho Daalderop

Signs Your MVHR Needs Servicing

If you recognise any of these in your home, your MVHR is overdue a service:

  • Windows steaming up in the morning
  • Musty or stale smell that never clears
  • Black mould returning after you clean it
  • Bathroom staying damp long after a shower
  • The unit has become noticeably louder
  • Weak or no airflow from ceiling vents
  • You have never had it serviced since moving in
  • Filters visibly grey, furry or clogged

If the unit has actually stopped, is leaking water or is making a grinding noise, you need our MVHR repair service instead.

The Benefits

Healthier Air

Clean filters remove London traffic pollution, pollen and dust — and keep humidity low so mould and dust mites cannot take hold.

Lower Energy Bills

A clean heat exchanger recovers far more heat, and clean filters let the fans run on lower, cheaper speeds.

No Damp or Mould

Correct airflow removes moisture at source — the single most effective fix for condensation and black mould in modern flats.

MVHR Servicing for Blocks & Landlords

Damp and mould complaints are one of the biggest sources of resident dissatisfaction in modern blocks — and in most cases the root cause is an MVHR system that has never been serviced. We run block-wide MVHR servicing programmes across London with coordinated resident access, discounted per-unit rates and full compliance reporting for the whole development.

Enquire About Block Servicing

MVHR Service from £120

Single-flat MVHR service from £120, including filter replacement and a full airflow check. Discounted block rates available for property managers and housing associations.

Request a Written Quote

MVHR Servicing FAQs

How often should an MVHR system be serviced?
An MVHR unit should be fully serviced once a year, with filters checked or replaced every 6 to 12 months depending on how dusty your area is. London properties near busy roads usually need filters changed every 6 months.
How much does an MVHR service cost in London?
An MVHR service in London starts from £120 for a standard single-flat unit, including filter replacement, heat exchanger clean and an airflow check. Block and portfolio rates are discounted — contact us for a written quote.
What is included in an MVHR service?
Filter inspection and replacement, heat exchanger core removal and clean, fan and impeller clean, condensate drain check and clear, ductwork and valve inspection, airflow measurement against the design rates, summer bypass and control test, and a full written report with photos.
What happens if I never service my MVHR?
Blocked filters choke airflow, so the system stops removing moisture properly. The usual result is condensation on windows, damp and black mould, stale air, rising running costs as the fans work harder, and premature failure of the fan motors. An unserviced MVHR can also breach Building Regulations Part F ventilation requirements.
How long does an MVHR service take?
A standard single-flat MVHR service takes around 60 to 90 minutes. Larger units, loft-mounted systems with difficult access, or systems needing a full airflow rebalance can take longer.
Which MVHR brands do you service?
All major brands including Vent-Axia, Nuaire, Titon, Zehnder, Vaillant recoVAIR, Systemair, Brink, EnviroVent, Airflow, Domus, Blauberg and Itho Daalderop. We carry common filter sizes for same-visit replacement.
Do you service MVHR in blocks of flats?
Yes. We run block-wide MVHR servicing programmes for property managers, managing agents and housing associations across London, with coordinated resident access, discounted per-unit rates and full compliance reporting.

Book Your MVHR Service

Speak to a specialist ventilation engineer today. Free quotes, transparent pricing, no obligation.